Clean the fixture to remove all debris - use soap and water if necessary. Calcium Lime Remover
(CLR) can be used to remove lime deposits from lenses.
A silicone spray can be used to help protect the finish on all fixtures.
In coastal areas, some contractors use Plasti-Dip, a clear flexible coating which can be used to
protect the fixtures from the affects of the salt air.
Change the lamps at least once a year - twice a year may be required depending on homeowner's
usage. When changing lamps, use a corrosion preventative compound on the base of the bayonet -
based sockets as well as the pins on the MR 16's.
Where you have metal sockets or components, use a corrosion preventative compound to help
1) Straighten fixtures and remove or cut back excess plant growth.
2) Leave behind a diagram and list of equipment for your landscape design and tape it to the
back of the transformer panel.
©2013 Kichler Lighting. All rights reserved. Photographs and drawings herein and on
each individual page are the property of Kichler and may not be reproduced without Kichler's
Register Your Kichler Ceiling Fan